The Reduced Down on Metal Detectors Hub Revealed


“There are hundreds of metal detector groups around Australia, but I only knew of a handful of people here who were interested,” Lee said. Lee said the Bundaberg Area Metal Detecting Group started three weeks ago and the community started to discover it almost immediately. Metal detecting has been around since the late 1800s and is more popular in the Bundaberg Region than first thought. We’ll point you to the metal detector that’s right for you.

Extend the life of your DSP3, DSP IP and Metal Eliminator metal detectors by upgrading to the latest APEX metal detection technology. Safeguard your products from metal contaminants with a cost-effective metal detector for conveyor and drop-through applications.

Another disadvantage of discriminators was that they reduced the sensitivity of the machines. hey anthony sorry but I don’t have any experience with White’s so I cant say. Would you consider The Garrett GTI2500 to be an out-dated machine?

Robust, hygienic housing (up to protection class IP66 / 69K) enables easy cleaning. The AuditCheck function tests and documents detection in an automated process. Smart sensitivity adjustment and a high level of resistance to interference help to prevent erroneous activation.

The IQ4 Vertical Fall is a gravity fed / throat metal detector system designed for inspecting bulk, powders and granules. The IQ4 Pipeline is a robust metal detector system designed for use with pumped and flowing products such as meat slurries, soups, sauces, jams or dairy. The IQ4 Conveyorized Metal Detector system is designed for packaged and loose products and can be supplied with full retail compliance.

High-frequency kHz has shorter wavelengths and finds smaller targets with less conductivity, such as nuggets and flakes of gold. It’s your job to drop tin foil, nails, coins super fast reply and gold in your yard and play with discrimination. As you increase discrimination the machine will ignore other metals like tin foil, can tabs, nails, and coins.

One of our technicians brought in a similar piece from another metal detector, and we were able to test. We have to include the fact that this metal detector arrived at our lab missing a piece of the arm.

But you’re depth will be severely limited to the point where it’s not even worth it to detect. Most all round machines will do just fine for relic hunting. You’ll also want to avoid a pulse induction machine – or PI for short. Most machines are designed for coin and jewelry hunting – especially those priced under $600 or so.

You may also want to get a machine that’s relatively easy to use with not a lot of settings. ​Click here to read our complete guide on the best metal detectors for gold. The only factors you need to consider here is that you get a fully submersible machine with good discrimination – that’s really it. The major benefit to PI machines is their superior depth in highly mineralized areas like salt water beaches. Frequency and depth have an inverse relationship, so the higher you get, the less depth you’ll get on coin-sized targets.

The Garrett Ace 400 is a high-tech metal detector with a comprehensive control panel. We tested each metal detector’s performance finding iron nails, aluminum pull-tabs, pennies, nickels, dimes, quarters and precious metals. Metal detecting is not a hobby for the impatient that need immediate results.

Anything below that isn’t really considered a detector – it’s considered a toy. What makes one detector better than another (like cars) is the additional features and enhancements. All metal detectors detect metal – just like all cars drive down the road. There’s no quicker way to become frustrated with the hobby than buying a complicated detector you don’t understand. If no, then you’re probably going to want to start with an entry-level machine.

So, what do you think ?